Though the visual appeal of a new parquet floor is indeed noteworthy, their condition deteriorates with the passage of time. Such being the scenario, you have to approach a professional floor sander who can help you repair and restore its lost beauty and functionality.
Though you can even try a DIY if you are willing to save a few bucks, approaching professionals are always advisable. Their expert sanders have adequate knowledge and experience in sanding parquet floors within the shortest span of time. They can even provide a few tips to people trying a DIY for parquet floor sanding in Croydon.
Opting For Parquet Floor Sanding In Parquet? Follow The Steps Stated Below
- Clean The Blocks
Remove the carpet and have a look at the blocks below. Earlier, a variety of black tar, known as Bitumen, was used to join them. Remove every residue of bitumen by chiselling, sanding, scraping and dipping them in a safe chemical. You can make them brittle by cooling the blocks which will help you remove Bitumen from all its grooves. The modern adhesive will bond the blocks quickly if you remove the Bitumen completely.
- Level The Underfloor
A closer look at the floor where the blocks are placed will help you notice that the underfloor is quite uneven. Sometimes, the floor material also gets damaged because of the process through which the Bitumen was removed. The concrete floor can be levelled using an acrylic levelling compound. Install the wood after ensuring that the compound has dried completely. If the sheet material is too uneven, a hand sander will do the needful.
- Re-Install Blocks
Place the blocks and try to maintain a minimum gap between two blocks. Professional sanders can suggest you the ideal parquet adhesive to fill these gaps later. Leaving tiny gaps between the blocks help them to expand and shrink when any change in the humidity or season occurs. If the adhesive has spilled accidentally, use a cloth to wipe it. If the blocks aren’t fitting well in the gaps, re-shape them before installation.
- Sand The Floor
Even if you have re-installed a few blocks, sanding the entire floor is always advisable. If you don’t want the gaps to widen or the blocks to move, start floor sanding in Croydon only after the adhesive has dried completely. Every layer of wax should be removed from the floor if you don’t want to block the sandpaper. The room that is being sanded should be well-ventilated. Cleaning the entire floor using a vacuum cleaner is a must after sanding it.
- Apply New Finish
Applying a new finish is the easiest way to get back the natural character of your parquet floor in Croydon. Oil finish quickly passes through the wooden blocks and renders long-term protection. The layer will prevent any sort of wear and tear and keep the floor protected from any sort of dirt or spill.
These being said, it’s time you follow the steps stated above or approach a professional offering floor sanding at a price that suits your budget.